Dimensional standards
Extracted standards
7 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Signage
- Conservation identification sign maximum number2 signs
Not more than two identification signs with a total area of not more than 32 square feet shall be permitted.
- Conservation identification sign maximum total area32 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
Not more than two identification signs with a total area of not more than 32 square feet shall be permitted.
- Conservation sign maximum heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first.8 ft
No sign shall exceed a height of eight feet.
- Conservation sign setbackSetbackThe distance a building must be held back from a lot line. from residential property line10 ft
No sign shall be erected within ten feet of any residential property line
- Conservation sign setbackSetbackThe distance a building must be held back from a lot line. from right-of-way5 ft
or within 5 feet of any developed public right-of-way.
- Conservation temporary sign maximum number2 signs
Not more than two temporary signs or banner signs with a total area of not more than 32 square feet shall be permitted in connection with special events
- Conservation temporary sign maximum total area32 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
Not more than two temporary signs or banner signs with a total area of not more than 32 square feet shall be permitted in connection with special events
From the ordinance
Not more than two identification signs with a total area of not more than 32 square feet shall be permitted.