Dimensional standards
Height & bulk
Servicing
- Geographic extent
- Citywide
Extracted standards
30 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Signage
- Maximum banner sign display duration120 days
No banner sign shall be displayed for a period exceeding 120 days
- Maximum banner sign displays per year2 times
nor shall banner signs be displayed on a lot more frequently than two times in a calendar year.
- Minimum banner sign heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first.7 ft
Banner signs shall be erected a minimum of seven feet above grade, except where mounted flush against the face of a building.
- Maximum on-site directional sign area8 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
Signs directing and guiding traffic on private property when such signs do not exceed eight square feet in area.
- Maximum freestanding directional sign heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first.4 ft
If freestanding, such signs shall not exceed four feet in height
- Freestanding directional sign setbackSetbackThe distance a building must be held back from a lot line.3 ft
or be located within three feet of a street line or other property line.
- Exempted signs
Signs not exceeding one square foot in area and bearing only property numbers... Flags and insignia of a governmental unit... Legal notices... Integral decorative or architectural features... Signs displayed no longer than 30 days per calendar year and not to exceed 32 square feet... Memorial signs and historical markers... Signs not exceeding five square feet in area providing directions... Signs showing the location of underground facilities... Non-illuminated signs, not more than four square feet in area... Signs on the inside of establishments... Signs displayed on major holidays... Street address signs, not exceeding ten square feet in area... Signs displayed on a truck, bus, or other vehicle while in use in the normal conduct of business.
- Illumination standards
No light from any illuminated sign shall cause direct glare into or upon any building other than the building to which the sign is related. No light from any illuminated sign shall cause direct glare on to any adjoining piece of property, or any adjoining right-of-way. Arrows or other directional indicators on a sign may not be illuminated.
- Maximum projection over sidewalk/street5 ft
No sign shall be allowed to project over any sidewalk, street or alley further than five feet from the face of the building.
- Maximum roof sign heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first. above roof20 ft
shall not extend more than 20 feet above the roof of the building.
- Maximum sign surface area300 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
No sign, other than roof signs and flat metal signs placed tightly to a building, shall be constructed or erected having more than 300 square feet of surface.
- Minimum space between roof sign and roof5 ft
There shall be a space of at least five feet between any roof sign and the roof.
- Minimum wind resistance30 psf
All signs shall be designed to withstand a wind pressure of 30 pounds minimum per square foot of surface.
- Permit duration5 years
the city manager shall issue a permit for the erection, operation and maintenance of such sign for a period of five years from the date of issue.
- Permit expiration1 years
A permit shall be valid for a period of one year from the date of issuance by the city manager
- Sign permit required
No person desiring to erect and maintain any sign over, on or in any sidewalk, street, alley, park or other public place in the city, or any roof sign upon any building in the city, shall do so unless a permit is first obtained therefor from the city.
- Portable sign illumination
No portable sign shall be illuminated.
- Maximum portable sign area32 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
Portable signs shall not exceed 32 square feet in area.
- Maximum portable signs per lot1 signs
Not more than one portable sign shall be permitted on a lot
- Portable sign setbackSetbackThe distance a building must be held back from a lot line.5 ft
No portable sign shall be located within five feet of any street right-of-way, other property line or any driveway.
Any sign that obscures a public agency sign. Any sign attached to utility pole or public property. Any sign in public right-of-way. Flashing or revolving lights. Any sign simulating traffic signal. Any sign that rotates or moves. Billboard signs.
- Roof sign setbackSetbackThe distance a building must be held back from a lot line. from parapet8 ft
Roof signs shall be set back at least eight feet from the parapet walls on a street front
- Maximum sandwich board signs per business1 signs
Within the commercial districts, one sandwich board sign is permitted for each business
- Maximum sandwich board signs per shopping center12 signs
for shopping centers are not to exceed a total of 12 sandwich board signs.
- Maximum sandwich board sign heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first.6 ft
Such signs shall not be greater than six feet in height
- Maximum sandwich board sign width2.5 ft
or 2½ feet in width
- Minimum sidewalk clearance for sandwich board4 ft
nor shall they obstruct the sidewalk to less than four feet in width.
- Maximum temporary sign area in commercial/industrial districts18 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
One or more temporary signs not exceeding an aggregate area of 18 square feet shall be permitted in commercial or industrial zoning districts.
- Maximum temporary sign area in residential districts6 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
One or more temporary signs not exceeding an aggregate area of six square feet shall be permitted in the residential zoning districts
- Temporary sign setbackSetbackThe distance a building must be held back from a lot line. from right-of-way10 ft
Any such sign shall not be located within ten feet of any developed public right-of-way.
From the ordinance
No person desiring to erect and maintain any sign over, on or in any sidewalk, street, alley, park or other public place in the city, or any roof sign upon any building in the city, shall do so unless a permit is first obtained therefor from the city.