Dimensional standards
Extracted standards
7 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Signage
- Maximum number of identification signs2 count
Not more than two identification signs with a total area of not more than 32 square feet shall be permitted.
- Maximum total area of identification signs32 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
Not more than two identification signs with a total area of not more than 32 square feet shall be permitted.
- Maximum sign heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first.8 ft
No sign shall exceed a height of eight feet.
- Sign setbackSetbackThe distance a building must be held back from a lot line. from residential property line10 ft
No sign shall be erected within ten feet of any residential property line
- Sign setbackSetbackThe distance a building must be held back from a lot line. from developed public right-of-way5 ft
or within 5 feet of any developed public right-of-way.
- Maximum number of temporary signs2 count
Not more than two temporary signs or banner signs with a total area of not more than 32 square feet shall be permitted in connection with special events
- Maximum total area of temporary signs32 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
Not more than two temporary signs or banner signs with a total area of not more than 32 square feet shall be permitted in connection with special events
From the ordinance
In addition to the regulations generally applicable to signs in all districts, the following signs shall be permitted and the following regulations shall apply in the conservation district.