Extracted standards
10 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Other
- Drive-through location
Drive-throughs shall be located to the side or at the rear of the building so as not to compromise the quality of the pedestrian experience at the street edge.
No driveway shall be located within 15 feet of a corner side lot line or closer than five feet from the end of a curb radius.
- Driveway spacing
Lots with two or more driveways along the same street frontage shall provide at least 75 feet between driveways.
- Driveway width
No driveway shall exceed 50 feet in width at the curbline or more than 35 feet at the lot line. One-way driveways shall have a minimum width of 15 feet; two-way driveways shall be at least 24 feet wide.
- Loading berth access
Every loading berth shall be provided with safe and convenient access to a street, but in no case shall the loading space extend into the required aisle of the parking lot.
- Loading berth delineation
Each loading berth shall be delineated by signage and striping and labeling of the pavement.
- Loading berth dimensions
Each loading berth required by this subsection shall be at least 10 feet wide by 35 feet long (or deep), with at least 15 feet of overhead clearance.
- Maximum driveways4 count
In no instance shall the number of driveways serving a single lot along a single street frontage exceed a maximum of four.
- Stacking lane distance
Nonresidential uses shall provide stacking areas for entering vehicles in accordance with the minimum stacking lane distance established in Table 40.2-303(2) Stacking Lanes for Parking Lot Entrances.
- Stacking space size
Stacking spaces shall be a minimum of eight feet by 20 feet in size.
From the ordinance
Stacking spaces shall be a minimum of eight feet by 20 feet in size.