Paso Robles, California · General provision

21.34.050

Dimensional standards

lot requirementsSTREETbuildable areaRear 10 ftSide 5 ftMAX LOT COVERAGE75%MAX DENSITY12 du/ac
Plan view of the district’s stated lot requirements. Solid line: the property line. Dashed: the setback lines the ordinance imposes; a building must stay inside the tinted envelope. Drawn from the figures extracted below — illustrative, not a survey.

Uses

Extracted standards

2 individual requirements pulled out of this section’s prose, each with the sentence it came from.

Other

  • Maximum cumulative gross floor area of detached accessoryAccessory useA secondary activity customarily incidental to the main use of the lot — a garage, a home office. structures as percentage of primary structure50 pct

    The cumulative gross floor area of all detached accessory structures on a lot shall be limited to fifty percent of the floor area of the primary structure

  • New residential as primary use shall comply with R-3 standards

    New residential as a primary use shall comply with development standards of the R-3 multi-family residential zoning district (Sections 21.34.030 and 21.34.050) and Chapter 21.50

From the ordinance

Maximum Density: Twelve units/acre. Maximum Lot Coverage: Seventy-five percent. Accessory Structures: The cumulative gross floor area of all detached accessory structures on a lot shall be limited to fifty percent of the floor area of the primary structure.
21.34.050