Extracted standards
4 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Other
- Commercial addition threshold1,000 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
For commercial, industrial, or other nonresidential use, the fence or wall shall be made to conform at the time of any increased intensity of use of additional square footage exceed one thousand square feet on the premises.
- Commercial conform at intensity increase
For commercial, industrial, or other nonresidential use, the fence or wall shall be made to conform at the time of any increased intensity of use of additional square footage exceed one thousand square feet on the premises.
- Multi-familyMultifamily dwellingA building of four or more dwelling units. Where zoning is most restrictive. conform at density increase
For multi-family residential uses, the fence or wall shall be made to conform at the time of any increased density or additional of dwelling units on the premises.
- Single-familySingle-family dwellingOne dwelling unit on its own lot, usually detached from its neighbours. maintenance allowed
For single-family residential uses, a legal nonconformity is allowed to be maintained in all circumstances.
From the ordinance
Any fence or wall that is legally nonconforming with respect to height, materials, or absence where required shall be brought into compliance with the provisions of this title in the following circumstances: A. For single-family residential uses, a legal nonconformity is allowed to be maintained in all circumstances. B. For multi-family residential uses, the fence or wall shall be made to conform at the time of any increased density or additional of dwelling units on the premises. C. For commercial, industrial, or other nonresidential use, the fence or wall shall be made to conform at the time of any increased intensity of use of additional square footage exceed one thousand square feet on the premises.