Placer County Unincorporated, California · District

P-11

No dimensional standards extracted

This district was identified in the ordinance, but no lot, setback or height figures were found in the sections read so far.

Uses

Conditional / special use2

  • A common wall or party wall agreement, deed restriction or other enforceable restriction has been recorded; and
  • The side setbacks opposite the common wall property line are not less than two times the minimum width required by this

From the ordinance

b. A common wall or party wall agreement, deed restriction or other enforceable restriction has been recorded; and
3. Reduced Setbacks on Zoning Map No. P-11 (Serene Lake and Ice Lakes).

Use details

{
  "dropped_conditions": {
    "conditional_uses": [
      "Common wall construction is in compliance with the California Building Code and Chapter 15 as adopted in the Placer Coun",
      "**Multi-Use Sites.** An application for a sign permit on a site with three or more separate land uses or commercial or i",
      "**On-Premises Signs.** A sign permit for an on-premises sign shall be approved if the planning director determines that ",
      "**Off-Premises Signs.** An off-premises sign shall be permitted and constructed as follows:",
      "**Permit Approval or Disapproval.** The permit application shall be reviewed by the zoning administrator, who shall eith",
      "**Sign Completion.** The construction of an approved off-premises sign shall be completed within one year of permit issu",
      "**Variances.** No variance to the provisions of this chapter shall be granted which allows the placement of a sign in a ",
      "**Measurement of Sign Area.** For the purpose of determining whether a sign is consistent with the requirements of this ",
      "**Sign Faces Counted.** Where a sign has two faces containing sign copy, which are oriented back-to-back and separated b",
      "**Wall-Mounted Letters.** Where a sign is composed of letters individually mounted or painted on a building wall, withou",
      "**Three-Dimensional Signs.** Where a sign consists of one or more three-dimensional objects such as balls, cubes, cluste",
      "**Exempt Signs.** The following on-premises signs are exempt from the sign permit and other requirements of Sections 17."
    ]
  }
}