Dimensional standards
Height & bulk
Servicing
- Geographic extent
- Residential or mixed-use zones
Extracted standards
3 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Other
- Maximum floor area ratioFloor area ratio (FAR)Total floor area divided by lot area — an FAR of 2.0 permits 20,000 sq ft of floor on a 10,000 sq ft lot. increase0.75 FARFloor area ratio (FAR)Total floor area divided by lot area — an FAR of 2.0 permits 20,000 sq ft of floor on a 10,000 sq ft lot.
no increase in floor area ratio greater than 0.75
- Maximum heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first. increase60 ft
no increase in height greater than 60 feet
- Special use permitConditional useAllowed only after a discretionary approval — usually a public hearing and a board vote. required for density/heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first. increase
provided, that a special use permit is approved
From the ordinance
a public elementary or secondary school, located in a residential or mixed-use zone, may be constructed, expanded or reconstructed to a size which exceeds the density and height otherwise permitted... provided that a special use permit is approved.