Dimensional standards
Lot
Density
Uses
Permitted by right4
- any permitted, conditional, or accessory use within the MUC zone
- single-family detached dwellings (when 10 or more are part of the planned development)
- two-family dwellings (when 10 or more dwelling units configured as single-family detached, two-family, or townhouse are part of the planned development)
- townhouse (when 10 or more townhouses are part of the planned development)
Extracted standards
5 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Height
- Maximum distance between floor and finished ceiling20 ft
The maximum distance between the floor and finished ceiling of any story of any building shall be 20 feet.
Other
- Minimum common open spaceOpen spaceLand a development must leave unbuilt, sometimes required to be usable or planted.30 pct
Thirty (30) percent of gross project area.
- Minimum districtZoning districtA mapped area with one set of rules, identified by a code like R-1 or B-2. size2 acresacre43,560 square feet — about the size of an American football field without the end zones.
Two (2) contiguous acres, which may include properties located directly across public or private street or alley rights-of-way from one another.
- Sidewalks or pedestrian pathways required
Sidewalks or other pedestrian pathways are required.
- Street paving required
Gravel and similar unconsolidated surfaces are not permitted; roads must be paved.
From the ordinance
Planned developments permitted within the R6 residential planned unit development zone are also permitted within the MUC zone... The maximum gross density of residential units is 30 units per acre. Minimum common open space or park: 30 percent of gross project area.